Phone: (317) 897-7000
Fax: (317) 898-2917

Unit of Measure

Model

N/A C-7000

Cold Rolled Steel

N/A 14 (0.074) gauge

Slide Length - A

N/A 22.00 in

Forward Extension - B

N/A 22.88 in

Weight Capacity

N/A 130 lbs

Weight Capacity Notes

N/A Load capacity is based on one slide at full extension with the load (center of gravity) at the midpoint of the slide (chassis section). This capacity has a 100% static (non-moving) load safety factor at full extension. It is not intended for operation with loads exceeding specified load capacity. For increased load capacity, multiply the number of slides required for the application.

Temperature

N/A -65 to 350 ºF

Options

N/A Locking at fully extended position

Spec Sheets

N/A Specification Sheet

Installation Sheet

N/A Installation Sheet

GDI Reference #

N/A CC7000-00-0220

N/A

  • C-7000 slides have positive stops but do not lock at any position. Optional lock-out feature is readily available.
  • Slide finish is clear zinc commercial plating.
  • Ball bearing rollers are lubricated with -45ºF to 350ºF temperature range grease.
  • Load capacity is based on one slide at full extension, with load (center of gravity) at midpoint of the slide (chassis section). This capacity has a 100% static (non-moving) load safety factor at full extension, but is not intended to be operated with loads exceeding specified load capacity. For increased load capacity, multiply number of slides required for the application.
  • Slide is designed for compression or suspension loading.
  • Slide members and plates are made of 14 gage (0.074) cold rolled steel.
  • Standard mounting hardware package (CA8612-00-0059) is included with each slide assembly, containing #8-32 x 0.38 slotted pan head screws and #8-32 KEPS®nuts.
  • Other non-standard options are available including other finishes and lock-in features. These options require a special reference number.