Phone: (317) 897-7000
Fax: (317) 898-2917

Unit of Measure

Slide Length - A

N/A 22.00 in

Chassis Length - B

N/A 22.00 in

Weight Capacity

N/A 130 lbs

Weight Capacity Notes

N/A Load capacity is based on one set of slides at full extension with load (center of gravity) centered between the slides and at midpoint of the slide (chassis section). Load capacities have a 100% (static load) safety factor at full extension. The slides will support more than the stated capacities but are not designed to be operated at capacities greater than those stated.

Optional Mounting Bracket

N/A B-131|B-131-2|B-131-2.5|B-131-3|B-131-3.5|B-131-4

Spec Sheets

N/A Specification Sheet

GDI Reference #

N/A CC2401-00-0220

N/A

  • Right hand and left hand slide are same.
  • Finish: All standard slides are coated with Poxylube® dry film lubricant.
  • All standard slides are designed to lock in the extended position.
  • Automatic release is available if lock-out is not desirable.
  • Standard hardware packages include all hardware necessary to mount Chassis Trak® slides:
    • Rear mounting brackets (B-131)
    • Bar nuts (CA8056-06-0020)
    • #10-32 x 0.50 F.H.M.S.
    • #10-32 x 0.50 B.H.M.S.
    • #10-32 KEPS® nuts
  • All sliding members of this slide are made from cold rolled steel.
  • All Chassis Trak® solid bearing slides are supplied with a quick disconnect feature. This permits the entire chassis to be easily removed and replaced.
  • Optional mounting patterns, slide lengths and extensions are available.