General Devices Co., Inc. - CLB-223 Heavy Duty 3/4 Extension with Quick Disconnect Ball Bearing Slide

Unit of Measure

Items	CLB-223-10 CLB-223 Heavy Duty 3/4 Extension with Quick Disconnect Ball Bearing Slide	CLB-223-11 CLB-223 Heavy Duty 3/4 Extension with Quick Disconnect Ball Bearing Slide	CLB-223-12 CLB-223 Heavy Duty 3/4 Extension with Quick Disconnect Ball Bearing Slide	CLB-223-13 CLB-223 Heavy Duty 3/4 Extension with Quick Disconnect Ball Bearing Slide	CLB-223-14 CLB-223 Heavy Duty 3/4 Extension with Quick Disconnect Ball Bearing Slide
Type	N/A Automatic Release
Model	N/A CLB-223
Cold Rolled Steel	N/A 14 (0.074) gauge
Mounting Screw Head Height - Max.	N/A 0.094 in
Slide Length - A	N/A 10.00 in	N/A 11.00 in	N/A 12.00 in	N/A 13.00 in	N/A 14.00 in
Forward Extension - B	N/A 7.00 in	N/A 8.00 in	N/A 9.00 in	N/A 10.00 in	N/A 11.00 in
Weight Capacity	N/A 250 lbs	N/A 250 lbs	N/A 250 lbs	N/A 245 lbs	N/A 240 lbs
Weight Capacity Notes	N/A Load capacity is based on one set of slides at full extension with load (center of gravity) centered between the slides and at midpoint of the slide (chassis section). Load capacities have a 100% (static load) safety factor at full extension. The slides will support more than the stated capacities but are not designed to be operated at capacities greater than those stated.
Temperature	N/A -45 to 350 ºF
Ambient Temperature	N/A 150 ºF
Finish	N/A Clear zinc commercial plating
Mounting Option	N/A
Notes	N/A CLB-223 consists of one right hand and one left hand slide (1pair). If ordered individually, a special reference number will be assigned. All slides are supplied with special (0.094" max. head height) #8-32 x 3/8" Phillips pan head screws and self-locking nuts for mounting one pair of slides. Use only these special screws when mounting through slide member to prevent internal damage to ball retainer. If mounting to cabinet rails see cabinet mounting section for ball bearing slides. CLB-223 has front disconnect feature and locks at full extension. For non-locking see "order" chart. Slide members are made from 14 gauge (0.074) work hardened cold rolled steel. Slide finish is clear zinc commercial plating. Holes other than those shown may be in part at vendor's option. Load capacity is based on one pair of slides at full extension with load (center of gravity) centered between the slides and at midpoint of the slide (chassis section). Load capacities have a 100% (static load) safety factor at full extension. The slides will support more than the stated capacities, but are not designed to be operated at capacities greater than those stated. Grease applied to ball bearing slides has a temperature range of -45ºF to 350ºF. However, due to the use of plastic guide and support balls, slide is designed for applications not exceeding 150°F (ambient temperature). Other non-standard options which are available include: special marking, special extensions, special finishes, lock-in, and complete design changes per request. Factory as these options will require a special reference number to assure receipt of specified options.
GDI Reference #	N/A CC7802-00-0100	N/A CC7802-00-0110	N/A CC7802-00-0120	N/A CC7802-00-0130	N/A CC7802-00-0140