General Devices Inc.
General Devices Inc.
1410 S. Post Rd.,
P.O. Box 39100,
Indianapolis, IN 46239
Telephone:(317) 897-7000
Fax: (317) 898-2917
E-mail: sales@generaldevices.com
Print Back
Unit of Measure

Specifications

Type

 N/A Automatic Release

Model

 N/A CLB-223

Cold Rolled Steel

 N/A 14 (0.074) gauge

Mounting Screw Head Height - Max.

N/A 0.094 in

Slide Length - A

N/A 27.00 in

Forward Extension - B

 N/A 19.0 in

Weight Capacity

 N/A 185 lbs

Weight Capacity Notes

 N/A Load capacity is based on one set of slides at full extension with load (center of gravity) centered between the slides and at midpoint of the slide (chassis section). Load capacities have a 100% (static load) safety factor at full extension. The slides will support more than the stated capacities but are not designed to be operated at capacities greater than those stated.

Temperature

 N/A -45 to 350 ºF

Ambient Temperature

 N/A 150 ºF

Finish

 N/A Clear zinc commercial plating

Spec Sheets

 N/A CLB-223.pdf

GDI Reference #

 N/A CC7802-00-0270

Installation Sheet

 N/A Installation Sheet

Notes

N/A

  • CLB-223 consists of one right hand and one left hand slide (1pair). If ordered individually, a special reference number will be assigned.
  • All slides are supplied with special (0.094" max. head height) #8-32 x 3/8" Phillips pan head screws and self-locking nuts for mounting one pair of slides. Use only these special screws when mounting through slide member to prevent internal damage to ball retainer. If mounting to cabinet rails see cabinet mounting section for ball bearing slides.
  • CLB-223 has front disconnect feature and locks at full extension. For non-locking see "order" chart.
  • Slide members are made from 14 gauge (0.074) work hardened cold rolled steel.
  • Slide finish is clear zinc commercial plating.
  • Holes other than those shown may be in part at vendor's option.
  • Load capacity is based on one pair of slides at full extension with load (center of gravity) centered between the slides and at midpoint of the slide (chassis section). Load capacities have a 100% (static load) safety factor at full extension. The slides will support more than the stated capacities, but are not designed to be operated at capacities greater than those stated.
  • Grease applied to ball bearing slides has a temperature range of -45ºF to 350ºF. However, due to the use of plastic guide and support balls, slide is designed for applications not exceeding 150°F (ambient temperature).
  • Other non-standard options which are available include: special marking, special extensions, special finishes, lock-in, and complete design changes per request. Factory as these options will require a special reference number to assure receipt of specified options.