General Devices Inc.
General Devices Inc.
1410 S. Post Rd.,
P.O. Box 39100,
Indianapolis, IN 46239
Telephone:(317) 897-7000
Fax: (317) 898-2917
E-mail: sales@generaldevices.com
Print Back
Unit of Measure

Specifications

Model

 CTHD

Stationary Section

 Strap Mount

Slide Length - A

 24.00 in

Forward Extension - B (min)

 24.25 in

Forward Extension - B (max)

 31.63 in

Chassis Length - D

 9.75 in

Min. (E)

 6.87 in

Max. (E)

 14.25 in

Weight Capacity

 275 lbs

Weight Capacity Notes

 Load capacity is based on one set of slides at full extension with load (center of gravity) centered between the slides and at midpoint of the slide (chassis section). Load capacities have a 100% (static load) safety factor at full extension. The slides will support more than the stated capacities but are not designed to be operated at capacities greater than those stated.

Spec Sheets

 Specification Sheet

Installation Sheet

 Installation Sheet

Notes

N/A ul>

  • Right hand slide shown, left hand opposite.
  • Finish: All standard slides are coated with Poxylube dry film lubricant.
  • All standard slides are designed to lock in the extended position.
  • Automatic release is available if lock-out is not desirable.
  • Standard hardware packages include all hardware necessary to mount Chassis Trak® slides:
    • #10-32 x 0.63 B.H.M.S.
    • #10-32 KEPS® nuts
  • All sliding members of this slide are made from cold rolled steel.
  • All Chassis Trak® solid bearing slides are supplied with a quick disconnect feature. This permits the entire chassis to be easily removed and replaced.
  • Pickup tab available for units without front panel.
  • Optional mounting patterns, slide lengths and extensions are available.