Item # C-938-12, C-938 Roller Bearing Bottom Mount Slide On General Devices Co., Inc.

Unit of Measure

Specifications | Notes

Model	N/A C-938
Cold Rolled Steel	N/A 12 (0.105) gauge
Slide Length - A	N/A 12.00 in
Forward Extension - B	N/A 12.06 in
Weight Capacity	N/A 400 lbs
Weight Capacity Notes	N/A Load capacity is based on one slide at full extension with the load (center of gravity) at the midpoint of the slide (chassis section). For increased load capacity, multiply the number of slides required for the application. Stated load capacity has a 100% static (non-moving) load safety factor at full extension. Slide is not intended to be operated with continuous loading which exceeds stated capacities.
Temperature	N/A -45 to 350 ºF
Options	N/A Lock-out features
Spec Sheets	N/A Specification Sheet
Installation Sheet	N/A Installation Sheet
GDI Reference #	N/A CC5200-00-0120

N/A

Standard C-938 has no locking features.
Optional lock-in/lock-out feature is available.
Slide finish is E-Coat conversion coating or clear zinc commercial plating.
Load capacity is based on one slide at full extension, with load (center of gravity) at midpoint of the slide (chassis section). For increased load requirements, multiply the number of slides required for the application.
Stated load capacity has a 100% static (non-moving) load safety factor at full extension. Slide is not intended to be operated with continuous loading which exceeds stated capacities.
Ball bearing rollers are lubricated with -45°F to 350°F temperature range grease.
Measured in the closed (retracted) position.
Slide members are made from 12 gage (0.105) cold rolled steel.
Other non-standard options including finishes and stainless steel slides are available. These options require a special reference number.
No mounting hardware supplied.
Slide designed for compression loading only.

Model