Item # CTHRD-418, CTHRD Pivot Up and Down (7 Position Lock) On General Devices Co., Inc.

Unit of Measure

Specifications | Notes

Model	N/A CTHRD
Stationary Section	N/A Closed Slot
Slide Length - A	N/A 18.00 in
Forward Extension - B (min)	N/A 21.00 in
Forward Extension - B (max)	N/A 23.63 in
Chassis Length - D	N/A 8.88 in
Min. (E)	N/A 6.50 in
Max. (E)	N/A 9.13 in
Weight Capacity	N/A 275 lbs
Weight Capacity Notes	N/A Load capacity is based on one set of slides at full extension with load (center of gravity) centered between the slides and at midpoint of the slide (chassis section). Load capacities have a 100% (static load) safety factor at full extension. The slides will support more than the stated capacities but are not designed to be operated at capacities greater than those stated.
Optional Mounting Bracket	N/A B-810-1 & B-810-2
Spec Sheets	N/A Specification Sheet
Installation Sheet	N/A Installation Sheet

N/A

Right hand slide shown, left hand opposite.
Finish: All standard slides are coated with Poxylube® dry film lubricant.
All standard slides are designed to lock in the extended position.
Automatic release is available if lock-out is not desirable.
Standard hardware packages include all hardware necessary to mount Chassis Trak® slides:
- Rear mounting brackets
- Bar nuts (CA8056-06-0020)
- #10-32 x 0.50 F.H.M.S. (flush front rail mounting)
- #10-32 x 0.63 B.H.M.S.
- #10-32 KEPS® nuts
All sliding members of this slide are made from cold rolled steel.
All Chassis Trak® solid bearing slides are supplied with a quick disconnect feature. This permits the entire chassis to be easily removed and replaced.
Pickup tab available for units without front panel.
Optional mounting patterns, slide lengths and extensions are available.

Model